Three-Dimensional Transformation Operations; Basic Operations - Sony MVS-8000X User Manual

MVE-9000 Multi Format DME Processor
The MVE-9000 is a "Digital Multi Effects" with multi-
format support.
For the MVE-9000, an optional MKE-9021A Input/Output
Board is available as a dedicated interface for integrated
use with the switcher.
There are two types of interfaces available for connecting
DMEs to the switcher: the dedicated interface and the SDI
interface.
For details, see "Setting the Interface Between the DME
and the Switcher" in Chapter 20 (Volume 2).
Notes
When using the SDI interface, the following operations are
different from when using the dedicated interface.
• Setting the input signals from the switcher to the MVE-
9000 (AUX bus outputs), and signals returned to the
switcher (reentry inputs).
For details, see "Setting the AUX Bus Output and
Reentry Input" in Chapter 20 (Volume 2).
• Selecting the combiner channels not in the key control
block, but in the Global Effect menu (see page 301).
234

Three-Dimensional Transformation Operations

Three-Dimensional
Transformation
Operations
To carry out three-dimensional DME transformations, use
either part of the device control block (joystick) and
numeric keypad control block or the optional device
control block (MKS-8031TB trackball module).

Basic Operations

Region selection buttons (DME1 to 4)
Part of the numeric
keypad control block
Operating buttons
MENU button
Part of the device control block (joystick)
Controls used for DME operations
Joystick