Creating And Saving A Master Snapshot; Snapshot Register Editing; Displaying A List Of Snapshot Registers For Editing; Operations In The Misc >Snapshot Menu - Sony MVS-8000X User Manual

• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knobs.
Knob Parameter Adjustment
1 Register Register number 1 to 4
5
In the <Recall Mode> group, select one of the
following modes for save and recall operations.
XPT: Only the key material selection data is saved or
recalled.
Modifier: Only the key modifier settings are saved or
recalled.
Transition: Only the independent key transition
settings are saved or recalled.
Creating and Saving a Master
Snapshot
To save a master snapshot in the Snapshot menu, after
recalling the Snapshot >Master Snapshot >Store menu,
refer to the operations in "Creating and Saving a Master
Timeline With the Menu" (page 406).
Recalling the Store menu
1
Do either of the following.
• In the menu control block, press the top menu
selection button [SNAPSHOT].
• In the numeric keypad control block, press the
[SNAPSHOT] button twice in rapid succession.
The Snapshot menu appears.
2
Press VF1 'Master Snapshot' and HF1 'Store.'
The Master Snapshot >Store menu appears.
The status area shows the master snapshot register
names, register lock status, register number for each
region, and so on.
3
If required, press the following buttons in the status
area to change the region display.
M/E, P/P: indicate assignment of M/E-1 ("M/E1")
and P/P ("P/P").
User: User1 ("USR1") to User8 ("USR8")
DME: indicate assignment of DME ch1 ("DME1"),
ch2 ("DME2"), ch3 ("DME3"), ch4 ("DME4"),
ch5 ("DME5"), ch6 ("DME6"), ch7 ("DME7"),
and ch8 ("DME8").

Snapshot Register Editing

You can carry out the following editing on snapshot
registers.
(You can use similar procedures also on master snapshot,
Setting values
wipe snapshot, DME wipe snapshot and key snapshot
registers.)
• Lock: Write-protect the contents of the register.
• Copy: Copy the contents of one register to another
register.
• Move: Move the contents of one register to another
register.
• Swap: Swap the contents of two registers.
• Delete: Delete the contents of a register.
• Name: Attach a name to a register.
For details of snapshot register operations, see "Effect
Register Editing" (page 408).
Displaying a List of Snapshot
Registers for Editing
You can display a list of snapshot registers including status
information (whether data is present and so on), then carry
out lock, copy, delete, and rename operations.
Displaying the list of snapshot registers
with status information
Press the menu title button at the top left of the Snapshot
menu.
The Snapshot >Status menu appears. The status area
shows a list of snapshot registers (1 to 99).
For details of lock, copy, delete, and rename operations,
see "Displaying a List of Effect Registers for Editing"
(page 410).
Register name displays
For the same number, the register name for the M/E-1
region takes precedence.
If there is no data for the M/E-1 region, then the register
name appears in the sequence M/E-2 >P/P >User1 to
User8 >DME ch1 to DME ch8 >RTR.
Operations in the Misc >Snapshot
Menu
Recalling a snapshot
1
In the Misc menu, press [Snapshot].
The Snapshot menu appears.
Snapshot Operations in the Menus
419