Sony MVS-8000X User Manual page 356

Function
Adding user texture
patterns (for Spotlighting)
Setting AUX bus output/
reentry input
TBC window center
position (Video/Key)
TBC window center
position (Ext.In)
Adjustment of monitor
output video clip level
Settings relating to usage
of editor port
1080P supported
a) [External] cannot be selected in the <Flex Shadow Source> group or [Ext
Video] cannot be selected in the <Flex Shadow Fill> group.
b) Effect groups 1 and 2 cannot be selected at the same time. Pattern 304
(Round Corner) is not supported.
356
Functional Differences With Models of DME
Menu number MVE-8000A
7316.9 No
7337.7 It is not possible to
make settings for
DME 1 to 8 Ext In.
7341.1 Yes only when SDI
interface is used.
No
7343 Yes only when SDI
interface is used.
7344 Yes
7313.1 Yes
MVE-9000 MKS-7470X/7471X
Yes No
It is not possible to It is not possible to
make settings for make settings for
DME 1 to 8 Ext In. DME 1 to 8 Ext In.
Yes only when SDI No
interface is used.
Yes Yes
Yes only when SDI No
interface is used.
Yes No
No Yes
See
"Adding User
Texture
Patterns" in
Chapter 18
(Volume 2)
"Setting the
AUX Bus
Output and
Reentry Input"
in Chapter 20
(Volume 2)
"Setting the
TBC Window
Center Position"
in Chapter 21
(Volume 2)
"Setting the
TBC Window
Center Position"
in Chapter 21
(Volume 2)
"Adjusting the
Monitor Output"
in Chapter 21
(Volume 2)
"Interfacing
With External
Devices
(Device
Interface
Menu)" in
Chapter 19
(Volume 2)
"Setting the
Signal Format
(Format Menu)"
in Chapter 18
(Volume 2)