Sony MVS-8000X User Manual page 597

Icon Message
Activate License
The license key you entered is invalid.
Please check and enter again.
License key was successfully entered.
The license will be activated after rebooting
your system.
Append Key Frame
[Append Key Frame] cannot be executed.
FMx is not assigned to a user region.
[Append Key Frame] cannot be executed.
Key Frame Register is locked. (UserX)
[Append Key Frame] cannot be executed.
Key Frame Register is busy. (UserX)
[Append Key Frame] cannot be executed.
Key Frame Register is being edited. (UserX)
[Append Key Frame] cannot be executed.
Key Frame Register is full. (UserX)
[Append Key Frame] cannot be executed.
Key Frame Register is not active.(UserX)
Backup
Success!!
Success!!
But the number of folder exceeds the
limit(12) and the files expected for the folders
were backed up in the default folder.
Or the name was changed because it was
the same file name.
External HDD Backup/Restore is running
(–2).
FM file auto extraction is running (–3).
Clip is recording (–4).
Description
7316.7: Engineering Setup >System >Install/Unit Config >License
>License Management
In the above menu, since the entered information was incorrect, the
Activate License procedure failed. Check the license key, and enter
again.
7316.7: Engineering Setup >System >Install/Unit Config >License
>License Management
In the above menu, the Activate License procedure completed
successfully.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame], but it failed because the frame memory output (FMx) is not
assigned to a user region.
7331.4: Make the assignment in the Engineering Setup >Switcher
>Config >User1-8 Config menu, and try again.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame] using a locked register (UserX region). Unlock the register.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame] using a register (UserX region) into which files are being
loaded. Try again after file loading has finished.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame] using a register (UserX region) with which a keyframe
creating or editing operation is proceeding. Try again after the
keyframe operation has finished.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame] using a register (UserX region) in which no keyframe
remains.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame] using a register for which the appropriate region selection
button in the numeric keypad control block is not selected. Try again
after you select the region selection button [UserX] in the numeric
keypad control block.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, saving files into the external hard disk
completed successfully.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, file saving to an external hard disk was
successful, but the limit on the number of folders was reached, and
therefore files were backed up in the default folder. Alternatively, the
file name was changed because a file of the same name already
existed.
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed in the above menu, a backup/
restore operation was being executed with the external hard disk.
2564:Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed in the above menu, extraction of
frame memory file data onto the VTR was being executed.
2564:Frame Memory >External Device >Backup to DDR/VTR
In the above menu, an external device is recording clips.
597
Error Messages