Nega Settings; Contrast Settings; Mosaic Settings; Sketch Settings - Sony MVS-8000X SystemMVS-7000X System User Manual

Masking the Posterization or Solarization
effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 310).

Nega Settings

Applying the Nega effect
1
In the DME menu, select VF2 'Video Modify' and
HF3 'Color Modify.'
The Color Modify menu appears.
2
Press [Nega Y] or [Nega C], turning it on, or press both
buttons, turning them on.
Nega Y: Reverse the luminance.
Nega C: Reverse the chroma.
Masking the Nega effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 310).

Contrast Settings

Applying the Contrast effect
1
In the DME menu, select VF2 'Video Modify' and
HF3 'Color Modify.'
The Color Modify menu appears.
2
Press [Contrast], turning it on.
3
Set the parameters.
Knob Parameter Adjustment
1 Y Clip Luminance
clip level
2 Y Gain Luminance
contrast
gradient
3 Y Offset Luminance
offset level
increment
4 C Gain Chroma
contrast
gradient
Masking the Contrast effect with a
selected pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 310).

Mosaic Settings

Applying the Mosaic effect
1
2
3
Masking the Mosaic effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
Setting values
type and modifiers (see page 310).
+109.59 to –7.31
–100.00 to +100.00

Sketch Settings

–100.00 to +100.00
Applying the Sketch effect
1
–100.00 to +100.00
2
Video output level
Video input level
Clip, Gain, Offset
In the DME menu, select VF2 'Video Modify' and
HF4 'Mosaic.'
The Mosaic menu appears.
Press [Mosaic], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Size Size of tiles
2 Aspect Aspect ratio
of tiles
a) Specify minus values to stretch the tiles in the vertical direction, and
plus values to stretch the tiles in the horizontal direction.
In the DME menu, select VF7 'Enhanced Video
Modify' and HF1 'Sketch.'
The Sketch menu appears.
Press [Sketch], turning it on.
Applying Special Effects (Effects on the Overall Video Signal)
Video output level
Video input level
Setting values
0.00 to 100.00
–100.00 to
a)
+100.00
307