Sepia Settings
Applying the Sepia effect
1
Open the DME >Video Modify >Color Modify menu
(4123).
2
Press [Sepia], turning it on.
3
Set the following parameters.
No.
Parameter Adjustment
1
Mix Y
Luminance signal mix amount
2
Mix C
Chrominance signal mix amount
3
Mix All
Luminance signal and
chrominance signal mix amount
simultaneous adjustment
4
To set the color of the sepia image, press [Sepia
Color], and set the following parameters.
No.
Parameter Adjustment
1
Luminance Luminance
2
Saturation
Saturation
3
Hue
Hue
To mask the Sepia effect with a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 224).
Mono Settings
Applying the Mono effect
1
Open the DME >Video Modify >Color Modify menu
(4123).
2
Press [Mono], turning it on.
To mask the Mono effect with a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 224)
.
Posterization/Solarization Settings
Posterization allows you to specify the degree of
luminance coarsening.
Solarization allows you to specify the degree of
chrominance coarsening.
Applying the Posterization/Solarization
effect
1
Open the DME >Video Modify >Color Modify menu
(4123).
2
Press [Poster/Solar], turning it on.
3
Set the following parameters.
No.
Parameter Adjustment
1
Poster
2
Solar
To mask the Posterization/Solarization effect with
a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 224).
Nega Settings
Applying the Nega effect
1
Open the DME >Video Modify >Color Modify menu
(4123).
2
To invert the luminance, press [Nega Y], turning it on.
3
To invert the chrominance, press [Nega C], turning it
on.
To mask the Nega effect with a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 224).
Contrast Settings
Applying the Contrast effect
1
Open the DME >Video Modify >Color Modify menu
(4123).
2
Press [Contrast], turning it on.
3
Set the following parameters.
221
Coarseness of luminance
gradations (posterization
parameter)
Coarseness of chrominance
gradations (solarization parameter)