Spot Color Adjustment - Sony MVS-8000SF User Manual

Knob
4
5
In the <Luminance Process Adjust> group, press [Dark], [Mid], or
[Bright], and adjust the following parameters for the three regions.
• In tint mode
Knob
1
2
3
• In color modify mode
Knob
1
2
3
To return the parameters to their default settings
In the <Luminance Process> group, press [Unity].
Masking a part of luminance processing
In the <Luminance Mask> group, press [Mask1] or [Mask2], turning it on, then
carry out the same procedure as in "Masking a part of the primary color
correction" (page 390).

Spot Color Adjustment

You can change the color of a specified color region to a different color,
without affecting other regions. You can also mask part of such a region.
Then for the region other than the region whose color you have changed, you
can make the following corrections.
• Video signal overall gain adjustment
• Y signal gain adjustment
• Y signal offset adjustment
• C signal gain adjustment
• C signal hue adjustment
Parameter Adjustment
Under D Soft Degree of softness at Under Dark
point
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Parameter Adjustment
Luminance Luminance
C Gain Chrominance signal gain
Hue Delay Hue delay
Setting values
15.00 to 70.00
Setting values
–100.00 to +100.00
0.00 to 100.00
359.99 to 0.00
Setting values
–100.00 to +100.00
0.00 to 200.00
–180.00 to +180.00
Color Corrector Functions
397