Connecting The Powerpad ® To Your Computer; Opening The Control Panel - AEMC 8335 Power Pad User Manual

6.2 Connecting the PowerPad
The PowerPad
®
ment to the computer.
To connect the PowerPad
1. Connect USB cable to the port on the side panel of the PowerPad
2. Connect the other end of the USB cable to a USB port on your computer.
3. Turn the PowerPad
must be on at all times when in use).
You are now ready to use the DataView

6.3 Opening the Control Panel

To open the Power Analyzer Control Panel:
Double-click the PowerPad Icon that was created during installation, located on
•
the desktop.
• The Connection window will appear (see Figure 6-4).
Once the communication link is established, DataView
the instrument that it is connected to.
• Make sure the communications port displayed in the dialog box matches the
instrument you plugged the USB cable into. If the correct port is not selected,
click on the drop-down menu to select it.
For detailed instructions and descriptions for any feature in a dialog box,
click on the Help Button, or right-click on the feature you want infor-
mation about.
Shop for AEMC products online at:
94
is supplied with a USB cable required for connecting the instru-
to your computer:
®
on (for the Control Panel to work, the PowerPad
®
PowerMeterStore
www.
to your Computer
®
software with the PowerPad
®
Figure 6-4
Power Quality Analyzer Model 8335
.
®
will automatically identify
®
1.877.766.5412
.ca
.
®
®