Table of Contents
Advertisement
6.5.6 Inrush
The Inrush tab shows the dialog box used to configure the parameters for an
Inrush search.
1.
Click the check box next to Schedule Inrush Search to activate the function.
2.
Set a time and date for the search to begin.
3.
Assign a Current Threshold in Amps, to trigger the inrush recording.
4.
Select the Channel to run the Inrush search on. The search can be performed
on one of the three current channels (A1, A2, A3) or all three (3A).
5.
Select a Hysteresis percentage.
Shop for AEMC products online at:
Power Quality Analyzer Model 8335
Figure 6-11
PowerMeterStore
www.
1.877.766.5412
.ca
103
Advertisement
Table of Contents
