Megohmmeter Control Panel; Connecting To The Computer; Enabling Bluetooth On The Instrument - AEMC 6526 User Manual

4.2 Megohmmeter Control Panel

After you install DataView, the DataView icon appears on your desktop. This opens the main DataView program. The instal-
lation process also places the Megohmmeter Control Panel icon on your desktop. Clicking this icon opens the Megohmmeter
Control Panel.
In general, DataView features are used for creating, viewing, editing, and storing DataView reports; while the Control Panel
is used for connecting to, configuring, viewing real-time measurements, running real-time tests, and downloading data from
the instrument. You can access DataView through the Control Panel, and access the Control Panel via DataView. For users
who interact with a single type of AEMC instrument, we recommend primarily using the Control Panel.
For further information about DataView and its capabilities, or for information about using the Megohmmeter Control Panel,
consult the Help system that comes with the product.

4.3 Connecting to the Computer

Before you can use the Megohmmeter Control Panel to communicate with your instrument, you must establish a Bluetooth
wireless connection between the instrument and the computer running DataView.
To begin, ensure that you have installed DataView, and selected the Megohmmeter Control Panel during the installation
process (see § 4.1). Also ensure that the required communication and connection drivers are installed on your computer.
These drivers are installed as part of the DataView installation process. Bluetooth must be enabled on the instrument (see
§ 4.3.1) and your computer. Some computers have Bluetooth connectivity built in, while others require a Bluetooth-USB
adapter. When this adapter is plugged into a USB port and configured with the appropriate driver, the computer can com-
municate via Bluetooth.
To connect the instrument to the computer, you must pair it via Bluetooth
lish the connection to DataView (§ 4.3.3).

4.3.1 Enabling Bluetooth on the Instrument

1. Set the rotary switch to MR
2. Press the
instrument.
38
1.800.561.8187
.
V
Ω
Ω
k
MR -
button for >2 seconds. The
www.
(§ 4.3.2) and then use the Control Panel to estab-
OFF
icon appears on the LCD, indicating Bluetooth is enabled on the
.com
Ω
M
50V
100V
250V
500V
1000V
Megohmmeter Model 6526/6532/6534
information@itm.com