AEMC 8335 Power Pad User Manual page 95

NOTE: The installation of the drivers may take a few moments. Windows
may even indicate that it is not responding, however it is running. Please
wait for it to finish.
14. When the drivers are finished installing, the Installation Successful dialog
box will appear. Click on OK.
15. Next, the Installation Wizard Complete window will appear. Click on Finish.
16. A Question dialog box appears next. Click Yes to read the procedure for con-
necting the instrument to the USB port on the computer.
NOTE: The Set-up window remains open. You may now select another
option to download (e.g. Adobe
17. Restart your computer, then connect the instrument to the USB port on the
computer.
18. Once connected, the Found New Hardware dialog box will appear. Windows
will complete the driver installation process automatically.
Shortcuts for DataView
installation process have been added to your desktop.
NOTE: If you connected your instrument to the computer before installing
the software and drivers, you may need to use the Add/Remove Hard-
ware utility to remove the instrument driver before repeating the process.
Shop for AEMC products online at:
Power Quality Analyzer Model 8335
Figure 6-3
®
and each instrument control panel selected during the
®
PowerMeterStore
www.
Reader), or close the window.
1.877.766.5412
.ca
93