Table of Contents
Advertisement
3.
When the DataView folder is open, find the file Setup.exe and double-click it to
run the installation program.
4.
The DataView setup screen appears. In the upper left section of the screen,
choose the language version you want to install. Then select DataView in the
Options list and click Install.
5.
The InstallShield Wizard welcome screen appears. The InstallShield Wizard
leads you through the installation process. As you complete these screens, be
sure to click Megohmmeter Logger when prompted to select the Control Panels
to install.
6.
When you have completed all screens, click Finish to leave the InstallShield
Wizard. Then close the DataView Setup screen. The DataView icon
appears on your computer desktop, along with the Megohmmeter Control Panel
icon.
Connecting to the Computer
1.
Set the rotary switch to MR
2.
Press the
Bluetooth is enabled on the instrument.
3.
Open the Bluetooth Devices dialog on your computer to pair the instrument with
your computer. Different operating systems have different steps for opening this
dialog, so consult your computer's documentation for instructions.
Once the dialog is displayed, click Add a Device. A dialog box appears listing
4.
the locally available Bluetooth devices. There may be several devices of varying
types listed, depending on the location of your computer.
5.
Find the instrument's Bluetooth name, and click it.
6.
You are prompted to enter a pairing code; enter 1111.
After you enter the code, click Next. A screen appears informing you that the
7.
instrument has been successfully connected with the computer. Click Close to
exit the screen.
8.
Open the Megohmmeter Control Panel. In the menu bar at the top of the screen,
select Help. In the drop-down menu that appears, click the option Help Topics.
This opens the Megohmmeter Control Panel Help system.
9.
Use the Contents window in the Help system to locate and open the topic "Con-
necting to an Instrument." This topic provides instructions explaining how to
connect your instrument to the computer.
10. After the instrument is successfully connected, consult the Control Panel Help
system for instructions about viewing real-time data, downloading and viewing
recorded sessions, creating DataView reports from the downloaded data, and
configuring the instrument through the Control Panel.
key for >2 seconds. The
.
icon appears on the LCD, indicating
now
Advertisement
Table of Contents
