AEMC 8335 Power Pad User Manual page 112

The Session Properties dialog box allows you to specify the Operator, Site and
Custom parameters that are to be saved with recorded data. These parameters
are used when generating reports.
The Operator and Site tabs allow you to maintain lists of operators and sites,
saving you time when specifying parameters for reports.
On the left of the Operator and Site tabs is the list of previously defined Operators
and Sites. On the right of the Operator and Site tabs is the individual parameters
that will be saved in an associated database. Only a single set of operator and site
fields are saved in the recording database.
The Custom tab contains a list of user defined parameters. Along side each user
defined parameter is a check box. Items that are checked will be added to an
associated database. Only a single set of Custom parameters can be maintained
(unlike the Operator and Site lists). The Custom tab allows you to specify any user
defined parameters (in addition to the comments field of the Site tab) that are to be
used in displaying a report.
In addition to the pre-designed report templates, DataView
to totally configure reports to your needs. Refer to the DataView
file on "Templates" to learn more about templates.
Shop for AEMC products online at:
110
Figure 6-17
PowerMeterStore
www. .ca
Power Quality Analyzer Model 8335
allows you
®
HELP
®
1.877.766.5412