Deleting A Transient - AEMC 8335 Power Pad User Manual

Item Function
Selection of graphs to be displayed
- 4V: displays the 4 single voltages during the transient (here in a 5-wire tri-phase
1 - 4A: displays the 3 currents and the neutral current during the transient
- L1, L2 or L3: displays the current and the single voltage successively in relation to
- N: displays neutral
Instantaneous value of the signals according to the position of the cursor on the scale.
2
To move the cursor use the ▲ and ▼ buttons.
3
3.
To return to the Recording List screen, press

5.1.1.4 Deleting a Transient

From the Recording List screen (see § 5.5.3), press the
Select the transient to be deleted using the ▲ and ▼ buttons, then press the
symbol.
To leave this screen without deleting, press any of the Mode buttons on the Pow-
erPad .
®
To return to the Waveform Capture screen, press
Shop for AEMC products online at:
Power Quality Analyzer Model 8335
connection)
phases 1, 2 and 3
: Zoom Out - To zoom out press the yellow button for this icon.
: Zoom In - To zoom in press the yellow keypad key for the icon.
PowerMeterStore
www.
Figure 5-4
1
2
3
.
icon's yellow button.
.
1.877.766.5412
.ca
53