Table of Contents
Advertisement
Item
Measurement Type
Configures alarms
Displays alarm log
Programs an alarm
OK
Validates the programming of an alarm (after OK is selected, the
Manually stops an alarm that is in progress
To program/display alarms, they must first be configured (see § 4.3.9)
2.
With the start field highlighted in yellow, press
3.
Use the ▲ and ▼ buttons to increase or decrease the value. Use the ◄ and
► buttons to move to the next parameter.
4.
When completed, confirm the Start alarm schedule with
5.
Use the ▼ button to set the Stop alarm settings, then repeat the previous
steps.
5.4.2 Starting an Alarm
1.
Press the OK icon's yellow button to launch the alarm campaign between the
start and end times that you specified.
2.
The OK icon disappears and the
3.
The Campaign on standby message is displayed while awaiting start time and
the
icon blinks on the screen's top display bar.
4.
The Campaign running message is displayed when start time begins.
5.
The Campaign schedule screen with the OK icon (bottom right-hand side of
the screen) are displayed when the end time is reached. You can then pro-
gram a new alarm campaign.
5.4.3 Manually Stopping an Alarm
An alarm can be manually stopped before the Stop date and time by pressing the
icon's yellow button. The OK icon will reappear in the same location.
Shop for AEMC products online at:
82
icon appears instead.
PowerMeterStore
www.
icon appears)
to enter the date and time.
.
.ca
Power Quality Analyzer Model 8335
1.877.766.5412
Advertisement
Table of Contents
