Table of Contents
Advertisement
6.5.3 Alarm Conditions Configuration
The Alarm Conditions tab allows you to set up 40 alarm configurations.
•
Schedule Alarm Search: Check this box to activate the alarms, and set a
starting and ending time and date to assign the time period during which the
alarms will be active.
•
Prev Page & Next Page: Move between the 4 pages of alarms with 10
alarms per page.
•
Capture Parameter: The Alarm will be triggered based on the value of the
selected parameter.
Choices include:
None: no alarm
Vrms: voltage root mean squared
Urms: voltage phase minus phase root
mean squared
Arms: current root mean squared
VPST: voltage short term flicker
Vcf: voltage crest factor
Ucf:
voltage phase minus phase
crest factor
Shop for AEMC products online at:
Acf:
current crest factor
Power Quality Analyzer Model 8335
Figure 6-8
PowerMeterStore
www.
Vunb: v oltage unbalance
Aunb: current unbalance
Hz:
frequency
Akf: current K factor
Vthd: voltage total harmonic distortion
Uthd: voltage phase minus phase total
harmonic distortion
Athd: current total harmonic distortion
.ca
W:
active power
1.877.766.5412
99
Advertisement
Table of Contents
