Table of Contents
Advertisement
Measured RMS values associated with waveforms.
Values of signals at an instant "t", at the intersection of cursor and the waveforms.
The cursor can be moved along the time scale by pressing the ◄ and ► buttons.
Measurement selection (refer to chart below)
Calculation of DPF, Tan, KF, Φ, UNB, Min, Max, VAR, Harmonics, PST, and
DF parameters and the frequency measurement can only be performed
if voltage or current with a frequency of 40 to 70Hz is applied to the Ch1
voltage input or the A1 current input.
Selection of waveforms to be displayed (use the ▲ and ▼ buttons to select):
U: Signifies phase-to-phase voltage
V: Signifies phase-to-neutral voltage
A: Displays V and A for each phase
L1, L2, L3: Refer to the phases (A,B,C)
Icon
RMS
THD
CF
V
A
VA
U
< >
^
PF...
W...
Shop for AEMC products online at:
Power Quality Analyzer Model 8335
Description
True RMS Measurement
Total Harmonic Distortion
Crest Factor
Display of current values and their extremes
Display all voltage and current measurements simultaneously
(RMS, DC, THD, CF, PST, KF, DF)
Fresnel diagram
Single voltage mode
Simple current mode
Power mode
Voltage mode (phase-to-phase)
Zoom in
Zoom out
Left/right key prompt
Up/down key prompt
Display of PF, DPF and Tan.
Active power.
Recording mode
Recording display and selection mode
PowerMeterStore
www.
1.877.766.5412
.ca
15
Advertisement
Table of Contents
