Table of Contents
Advertisement
Before using your instrument, you must set its date and time via DataView. Other basic setup tasks include
selecting:
Bluetooth enabled (can be done on the instrument or via DataView)
°F or °C for measurement units (can be done on the instrument or via DataView)
Auto OFF interval (requires DataView)
2.1. DataView Installation
1. Insert the USB drive that comes with the instrument into a USB port on your computer.
2. If Autorun is enabled, an AutoPlay window appears on your screen. Click "Open folder to view files" to
display the DataView folder. If Autorun is not enabled or allowed, use Windows Explorer to locate and
open the USB drive labeled "DataView."
3. When the DataView folder is open, find the file Setup.exe and double-click it.
4. The Setup screen appears. This enables you to select the language version of DataView to install. You
can also select additional install options (each option is explained in the Description field). Make your
selections and click Install.
5. The InstallShield Wizard screen appears. This program leads you through the DataView install process.
As you complete these screens, be sure to check Data Loggers when prompted to select features to
install.
6. When the InstallShield Wizard finishes installing DataView, the Setup screen appears. Click Exit to
close. The DataView folder appears on your computer desktop.
2.2. Connecting the Instrument to a Computer
You can connect the instrument to a computer either through the supplied USB cable or Bluetooth
steps of the connection procedure depend on the connection type:
USB:
1. Connect the instrument to an available USB port using the supplied cable.
2. Turn ON the instrument. If this is the first time this instrument has been connected to this computer, the
drivers will be installed. Wait for driver installation to finish before proceeding with step 3 below.
Bluetooth:
Connecting the instrument via Bluetooth requires a Bluegiga BLED112 Smart Dongle (sold separately) installed in
your computer. When the dongle is installed, do the following:
1. Turn ON the instrument by pressing the
2. Activate Bluetooth on the instrument by pressing the
After the USB cable is connected or Bluetooth is activated, proceed as follows:
3. Open the DataView folder on your desktop. This displays a list of icons for the Control Panel(s) installed
with DataView.
4. Open the DataView Data Logger Control Panel by clicking the
5. In the menu bar at the top of the screen, select Help. In the drop-down menu that appears, click the
option Help Topics. This opens the Data Logger Control Panel Help system.
6. Use the Contents window in the Help system to locate and open the topic "Connecting to an Instrument."
This provides instructions explaining how to connect your instrument to the computer.
7. When the instrument is connected, its name appears in the Data Logger Network in the left side of the
Control Panel. A green check mark appears next to the instrument name indicating it is currently
connected.
Thermo-Anemometer Data Logger Model 1227
2. SETUP
button.
button until the
symbol appears in the LCD.
icon.
®
. The first two
7
Advertisement
Table of Contents
