Button Functions - AEMC 8335 Power Pad User Manual

OK
Validation prompt
Shutdown function in progress prompt
Display of energy consumed
Display of energy generated
1
Screen 1 of the help function
2
Screen 2 of the help function
3
Screen 3 of the help function
4
Screen 4 of the help function
Screen 1 of the selected recording parameter
1
Screen 2 of the selected recording parameter
2
Screen 3 of the selected recording parameter
3
Screen 4 of the selected recording parameter
4
>t=0< Moves the cursor to transient triggering time
>5=-T<
Moves the cursor to one signal period before the transient triggering date
Activates/deactivates the selection of the transients list display filter
Following page screen
Previous page screen
Trash to delete or remove elements

2.5 Button Functions

Icon Description
Transients or Inrush Current:
Harmonics Mode:
Waveforms Mode:
Shop for AEMC products online at:
16
• Sets and views transient and inrush current waveforms associated with
rapid changes in input
• Displays the harmonics in percent and value ratios for voltage, current
and power for each harmonic through the 50th
• Determines harmonic current produced by non-linear loads
• Analyzes the problems caused by harmonics according to their order
(heating of neutrals, conductors, motors, etc)
• Displays voltage and current waveforms or vector representation
• Identifies signal distortion signatures
• Displays of amplitude and phase unbalance for voltage and current
• Checks connections for correct phase order
PowerMeterStore
www. .ca
Power Quality Analyzer Model 8335
1.877.766.5412