Four (4) current inputs on the top of the instrument to enable the use of
current sensors (MN, SR, AmpFlex
possible to use different current probes per input voltage ratio selectable.
Five (5) voltage inputs (voltage ratio can be set before recording).
USB optically isolated output for configuring, running tests and transferring
data to a PC.
Input for external power supply.
Enter button.
Four (4) buttons that enable movement of the cursor, browsing or the selec-
tion of data.
Buttons for directly accessing the 6 display modes (see § 2.5):
2.4 Display
Display: 320 x 240 pixels
1
2
3
Top display bar indicates:
•
Symbol of the tested mode (e.g.
•
Frequency of measured signal
•
Memory capacity status bar
•
Current date and time
•
Battery charge status (see § 8)
Shop for AEMC products online at:
14
, MiniFlex
®
4
Figure 2-2
(only available in certain modes)
PowerMeterStore
www.
, and MR probes). It is
®
,
,
, etc)
.ca
Power Quality Analyzer Model 8335
5
1.877.766.5412