Table of Contents
Advertisement
6.5.1 Setup
•
Reactive Values Calculation: With or without harmonics. Applies to VAR
calculation.
•
Nominal Frequency: 50 or 60Hz. This parameter determines the correction
coefficients used for calculating power and energy.
•
Current Sensor: MN93, MN193, SR193, MR193, A193, SL261 AmpFlex
MiniFlex
1 Amp or 5 Amp input)
•
Connection Type: Single-Phase, Two-Phase (Split Phase), 3-Phase 3 wire
or 3-Phase 5 wire.
•
Set Instrument's Clock: Resets the time and date on the PowerPad
of the computer or a desired setting.
•
Voltage Transformer Ratio: Sets the scale for voltage measurement in
cases where measurements are on the secondary side of a transformer and
the primary value needs to be displayed.
Shop for AEMC products online at:
Power Quality Analyzer Model 8335
or ADA Adapter (used to accept probes with other ratios or a direct
®
PowerMeterStore
www.
Figure 6-6
to that
®
1.877.766.5412
.ca
,
®
97
Advertisement
Table of Contents
