Programming And Starting A Search - AEMC 8335 Power Pad User Manual

5.1.1.1 Programming and Starting a Search

To program the search for a transient, proceed as follows:
Select the submenu by pressing the
Schedule screen is displayed.
Item Function
1
Reminder of the mode used
2
Display of sub-mode used
3
Flashing
4
Memory indicator. Black area = used memory; White area = available memory
5
Transients search start time
6
Transients search end time
7
Number of transients
8
Name of transient
To Configure and Start the Programming of a Search:
1.
Select and set the desired configurations for the Start/Stop date and time, the
Voltage and Current threshold, Count and Series name.
2.
To start programming a search between the start and end times which you
have defined press the yellow button for the OK icon.
• The OK icon disappears and the
• When the start time is reached the message Detection in progress is
displayed.
When the stop time is reached, the OK icon (bottom right of screen) is
•
Shop for AEMC products online at:
displayed again. It is then possible to program a new search.
Power Quality Analyzer Model 8335
1 2 3
icon: indicates that the search has been started
PowerMeterStore
www.
icon's yellow button. The Detection
4
Figure 5-2
icon appears instead.
5
6
7
8
1.877.766.5412
.ca
51