Snapshot Mode; Opening A Previously Saved Snapshot - AEMC 8335 Power Pad User Manual

5.7 Snapshot Mode

This button allows 50 snapshots to be saved for future recall and evaluation.
• Press the
• The
is successful.
• This icon is replaced by
record the display.
• The snapshot will record all measurements present at the input of the
meter when you press the
These screens can be downloaded to a computer using DataView

5.7.1 Opening a Previously Saved Snapshot

A short press (about 1s) on the
•
snapshots that have been saved.
• The small icon to the left of each snapshot (date and time) tells you what type of
data was stored.
• Use the ▲ or ▼ buttons to select the snapshot.
• To display the snapshot, press the
• After reviewing the snapshot, press the
saved snapshots.
The various storage spaces of the PowerPad
completely independent. There are four memory spaces available (alarms,
snapshot, transients and recordings).
Shop for AEMC products online at:
88
button (for about 3s) to capture the current display.
icon is displayed in the top left corner as soon as the operation
PowerMeterStore
www.
if there is no space left in the memory to
button.
button gives access to the menu of
Figure 5-37
button, then the
button again to return to the list of
®
Power Quality Analyzer Model 8335
button.
are of a fixed size and are
1.877.766.5412
.ca
®