Starting And Stopping Energy Measurements; Resetting The Energy Measurement - AEMC 8335 Power Pad User Manual

Wh
Active energy consumed
Reactive power:
VAR
Reactive energy consumed:
VARh
VA
Apparent power
VAh
Apparent energy consumed
NOTE: Filters L2 and L3 display the same information for phases 2 & 3.

5.6.1 Starting and Stopping Energy Measurements

• To start a measurement, press the
The date and time at which the measuring starts will appear in the upper
left-hand corner of the screen.
• To stop the measurement, press the
The date and time at which the measuring stops will appear in the upper
right hand corner of the screen.
NOTE: Stopping the metering is not definitive. It can be resumed by press-
ing the

5.6.2 Resetting the Energy Measurement

To reset the measurement, press the
All energy values (consumed and generated) are reset.
NOTE: Refer to the 4-quadrant power diagram in APPENDIX A.
Shop for AEMC products online at:
Power Quality Analyzer Model 8335
- Inductive
- Capacitive
- Inductive
- Capacitive
icon again. All of energy meters resume totalizing.
PowerMeterStore
www.
icon's yellow button.
icon's yellow button.
icon's yellow button, then
.ca
to confirm.
1.877.766.5412
87