Table of Contents
Advertisement
Sensors & Ratios
Transient Mode
Trend (Recording) Mode
Alarm Mode
Erase Memory
About
4.3.1 Date/Time
The
parameter defines the system date and time. The display is as follows:
The Date/Time field is highlighted in yellow.
•
To change the date/time, press the
•
To change a value or move from one field to another, press the ▲ or ▼
buttons.
•
Press the
NOTE: 12/24: Display of time in 24-hour format. AM/PM: Display of
time in 12-hour format. The time is followed by AM or PM.
Shop for AEMC products online at:
To return to the Configuration menu, press the
38
Defines the type of current probe to connect (see § 4.3.5)
• MN93: 200A
• MN193: 100A or 5A (with variable ratio)
• SR193: 1000A
• SL261: 10A and 100A range
• AmpFlex
Sensors: 3000A (measures up to 6500Arms)
®
• MiniFlex
Sensors: 1000A
®
• MR193: 1000A
• 5A three-phase adapter (3-channel only)
Configures the voltage and current thresholds (see § 4.3.7)
Selects the parameters to record (see § 4.3.8)
(Up to 4 configurations)
Defines the parameters of an alarm (see § 4.3.9)
Deletes configurations, alarm settings, snapshots and recordings
(see § 4.3.10)
Displays the serial number, software and hardware version
Figure 4-3
button to confirm configuration.
PowerMeterStore
www.
/1200A
AC
DC
button.
button.
Power Quality Analyzer Model 8335
1.877.766.5412
.ca
Advertisement
Table of Contents
