Phase-To-Phase Voltage Display Screen (L1) - AEMC 8335 Power Pad User Manual

5.2.4.2 Phase-to-Phase Voltage Display Screen (L1)

1
2
Item Function
Harmonic selection cursor; change values with the cursor using the ◄ and ►buttons
1
The horizontal axis indicates the orders of the harmonics (odd marking). Display of the
level of the harmonics as a percentage of the fundamental (order 1)
- DC: DC component
2
- 1 to 25: harmonics of order 1 to 25; when the cursor exceeds order 25, order 26 to 50
appears
-
- Uh 03: harmonic number
%: ratio of the harmonic to the fundamental
V: RMS voltage of the harmonic in question
3 +000°: phase shift with respect to the fundamental (order 1)
max – min: maximum and minimum levels of the harmonic in question (reset when the
harmonic number is changed or the
THD: total harmonic distortion
NOTE: Filters L2 and L3 display the harmonics of the phase-to-neutral voltage for
phases 2 and 3, respectively. The screen is identical to the one displayed for filter L1.
Shop for AEMC products online at:
Power Quality Analyzer Model 8335
: indicator of the presence of non-zero harmonics of order higher than 25
PowerMeterStore
www.
Figure 5-18
key is pressed)
1.877.766.5412
.ca
3
67