Performing A Configuration Replacement Or Rollback Operation - Cisco Catalyst 2960 series Configuration Manual

Replacing and Rolling Back Configurations
DETAILED STEPS
Command or Action
Step 1
configure terminal
Step 2
archive
Step 3 pathurl
Step 4 maximumnumber
Step 5 time-period minutes
Step 6 end
Step 7 show running-config
Step 8 copy running-config
startup-config

Performing a Configuration Replacement or Rollback Operation

Starting in privileged EXEC mode, follow these steps to replace the running configuration file with a saved
configuration file:
SUMMARY STEPS
1. archive config
2. configure terminal
3.
4. exit
5. configure replace target-url [list] [force] [time seconds] [nolock]
6. configure confirm
7. copy running-config startup-config
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2062
Purpose
Enter global configuration mode.
Enter archive configuration mode.
Specify the location and filename prefix for the files in the configuration archive
(Optional) Set the maximum number of archive files of the running configuration
to be saved in the configuration archive .
number-Maximum files of the running configuration file in the configuration
archive. Valid values are from 1 to 14. The default is 10.
Note Before using this command, you must first enter the path archive
configuration command to specify the location and filename prefix for
the files in the configuration archive.
(Optional) Set the time increment for automatically saving an archive file of the
running configuration in the configuration archive.
minutes-Specify how often, in minutes, to automatically save an archive file of
the running configuration in the configuration archive
Return to privileged EXEC mode.
Verify the configuration.
(Optional) Save your entries in the configuration file.