SUMMARY STEPS
1. enable
2. configure terminal
3. interface interface-id
4. vtp
5. end
6. show running-config interface interface-id
7. show vtp status
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3
interface interface-id
Example:
Switch(config)# interface gigabitethernet1/0/1
Step 4
vtp
Example:
Switch(config)# vtp
Step 5
end
Example:
Switch(config)# end
Step 6
show running-config interface interface-id
Example:
Switch# show running-config interface
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure VTP
Purpose
Enables privileged EXEC mode. Enter your password
if prompted.
Enters the global configuration mode.
Identifies an interface, and enters interface
configuration mode.
Enables VTP on the specified port.
Returns to privileged EXEC mode.
Verifies the change to the port.
2101