Description - Cisco Catalyst 2960 series Configuration Manual

op
Result String
val_remain %d
Where val_remain is the current value of the counter.
Set _cerrno
Yes
(_cerr_sub_err =
This error means that the operating system reported an error. The POSIX errno value that is reported with the
error should be used to determine the cause of the operating system error.
(_cerr_sub_err = 11)
This error means that the event specification ID could not be matched when the event was being registered
or that an event detector internal event structure is corrupt.
(_cerr_sub_err = 22)
This error means that an internal EEM event detector pointer was null when it should have contained a value.
(_cerr_sub_err = 30)
This error means that the counter event detector set or modify operator was invalid.

description

Provides a brief description of the registered policy.
Syntax
description ?
Arguments
line
2) FH_ESYSERR (generic/unknown error from OS/system)
FH_ENOSUCHESID
FH_ENULLPTR
FH_ECTBADOPER
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
(Mandatory)
• nop--Retrieves the current counter value.
• set--Sets the counter value to the given value.
• inc--Increments the counter value by the given
value.
• dec--Decrements the counter value by the given
value.
(unknown event specification ID)
(event detector internal error - ptr is null)
(bad counter threshold operator)
(Optional) Brief description of the policy consisting
of 1 to 240 characters.
description
2013