Sys_Reqinfo_Cli_Freq - Cisco Catalyst 2960 series Configuration Manual

sys_reqinfo_cli_freq

•
•
•
•
•
sys_reqinfo_cli_freq
Queries the frequency information of all command-line interface (CLI) events.
Syntax
sys_reqinfo_cli_freq
Arguments
None
Result String
rec_list {{CLI frequency string 0},{CLI frequency str 1}, ...}
Where each CLI frequency string is:
time_sec %ld time_msec %ld match_count %u raise_count %u occurs %u period_sec %ld period_msec %ld
pattern {%s}
rec_list
time_sec time_msec
match count
raise_count
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1996
sys_reqinfo_proc_all, page 2003
sys_reqinfo_routername, page 2004
sys_reqinfo_snmp, page 2004
sys_reqinfo_syslog_freq, page 2005
sys_reqinfo_syslog_history, page 2006
Marks the start of the CLI event frequency list.
Last time when this CLI event was raised.
Number of times that a CLI command matches the
pattern specified by this CLI event specification.
Number of times that this CLI event was raised. The
following fields are information about the CLI event
specification:
• sync--A "yes" means that event publish should
be performed sychronously. The event detector
will be notified when the Event Manager Server
has completed publishing the event. The Event
Manager Server will return a code that indicates
whether or not the CLI command should be
executed.
• skip--A "yes" means that the CLI command
should not be executed if the sync flag is not
set.