Removing Directories - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 3
dir filesystem:
Example:
Switch# dir flash:

Removing Directories

To remove a directory with all its files and subdirectories, use the delete /force /recursive filesystem:/file-url
privileged EXEC command.
Use the /recursive keyword to delete the named directory and all subdirectories and the files contained in it.
Use the /force keyword to suppress the prompting that confirms a deletion of each file in the directory. You
are prompted only once at the beginning of this deletion process.
For filesystem, use flash: for the system board flash device. For file-url, enter the name of the directory to be
deleted. All of the files in the directory and the directory are removed.
When directories are deleted, their contents cannot be recovered.
Caution
Copying Files
To copy a file from a source to a destination, use the copy source-url destination-url privileged EXEC
command. For the source and destination URLs, you can use running-config and startup-config keyword
shortcuts. For example, the copy running-config startup-config command saves the currently running
configuration file to the NVRAM section of flash memory to be used as the configuration during system
initialization.
You can also copy from special file systems (xmodem:, ymodem:) as the source for the file from a network
machine that uses the Xmodem or Ymodem protocol.
Network file system URLs include ftp:, rcp:, and tftp: and have these syntaxes:
• FTP—ftp:[[//username [:password]@location]/directory]/filename
• RCP—rcp:[[//username@location]/directory]/filename
• TFTP—tftp:[[//location]/directory]/filename
Local writable file systems include flash:.
Some invalid combinations of source and destination exist. Specifically, you cannot copy these combinations:
• From a running configuration to a running configuration
• From a startup configuration to a startup configuration
• From a device to the same device (for example, the copy flash: flash: command is invalid)
Purpose
Verifies your entry.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Working with the Flash File System
2043