Configuration Examples For Vtp - Cisco Catalyst 2960 series Configuration Manual

Command
show vtp interface [interface-id]
show vtp password
show vtp status

Configuration Examples for VTP

Example: Configuring a Switch as the Primary Server
This example shows how to configure a switch as the primary server for the VLAN database (the default)
when a hidden or secret password was configured:
Switch# vtp primary vlan
Enter VTP password: mypassword
This switch is becoming Primary server for vlan feature in the VTP
VTP Database Conf Switch ID
------------ ---- -------------- -------------- -------- --------------------
VLANDB
Do you want to continue (y/n) [n]? y
Related Topics
Configuring a VTP Version 3 Password , on page 2095
Passwords for the VTP Domain, on page 2091
Example: Configuring Switch as VTP Server
This example shows how to configure the switch as a VTP server with the domain name eng_group and the
password mypassword:
Switch(config)# vtp domain eng_group
Setting VTP domain name to eng_group.
Switch(config)# vtp mode server
Setting device to VTP Server mode for VLANS.
Switch(config)# vtp password mypassword
Setting device VLAN database password to mypassword.
Switch(config)# end
Related Topics
Configuring VTP Mode , on page 2093
Primary Server Revision System Name
Yes 00d0.00b8.1400=00d0.00b8.1400 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Configuration Examples for VTP
Purpose
Displays VTP status and configuration for all interfaces
or the specified interface.
Displays the VTP password. The form of the password
displayed depends on whether or not the hidden keyword
was entered and if encryption is enabled on the switch.
Displays the VTP switch configuration information.
stp7
domain
2105