Sys_Reqinfo_Crash_History - Cisco Catalyst 2960 series Configuration Manual

cpu_used
Set _cerrno
Yes

sys_reqinfo_crash_history

Queries the crash information of all processes that have ever crashed. This Tcl command extension is supported
only in Software Modularity images.
Syntax
sys_reqinfo_crash_history
Arguments
None
Result String
rec_list {{crash info string 0},{crash info string 1}, ...}
Where each crash info string is:
job_id %u name {%s} respawn_count %u fail_count %u dump_count %u
inst_id %d exit_status 0x%x exit_type %d proc_state {%s} component_id 0x%x
crash_time_sec %ld crash_time_msec %ld
job_id
name
respawn_count
fail_count
dump_count
inst_id
exit_status
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
sys_reqinfo_crash_history
Specifies that if sec and msec are specified with a
number greater than zero, the average percentage is
calculated from the process CPU utilization during
the specified time period. If sec and msec are both
zero or not specified, the average percentage is
calculated from the process CPU utilization in the
latest sample.
System manager assigned job ID for the process. An
integer between 1 and 4294967295, inclusive.
Process name.
Total number of restarts for the process.
Number of restart attempts of the process. This count
is reset to zero when the process is successfully
restarted.
Number of core dumps performed.
Process instance ID.
Last exit status of the process.
1999