Changing Directories And Displaying The Working Directory - Cisco Catalyst 2960 series Configuration Manual

Table 187: Commands for Displaying Information About Files
Command
dir [/all]
[filesystem:filename]
show file systems
show file information
file-url
show file descriptors

Changing Directories and Displaying the Working Directory

Follow these steps to change directories and to display the working directory:
SUMMARY STEPS
1. enable
2. dir filesystem:
3. cd directory_name
4. pwd
5. cd
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Switch> enable
Step 2 dir filesystem:
Example:
Switch# dir flash:
Step 3 cd directory_name
Description
Displays a list of files on a file system.
Displays more information about each of the files on a file system.
Displays information about a specific file.
Displays a list of open file descriptors. File descriptors are the internal
representations of open files. You can use this command to see if another user
has a file open.
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Displays the directories on the specified file system.
For filesystem:, use flash: for the system board flash device.
To access flash partitions of switch members in a stack, use flash-n
where n is the stack member number. For example, flash-4.
Navigates to the specified directory.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Working with the Flash File System
2041