802.1X Readiness Check - Cisco Catalyst 2960-X Security Configuration Manual

Configuring IEEE 802.1x Port-Based Authentication
Table 26: Accounting AV Pairs
Attribute Number
Attribute[1]
Attribute[4]
Attribute[5]
Attribute[8]
Attribute[25]
Attribute[30]
Attribute[31]
Attribute[40]
Attribute[41]
Attribute[42]
Attribute[43]
Attribute[47]
Attribute[48]
Attribute[44]
Attribute[45]
Attribute[46]
Attribute[49]
Attribute[61]
7 The Framed-IP-Address AV pair is sent when a valid static IP address is configured or w when a Dynamic Host Control Protocol (DHCP) binding exists for
the host in the DHCP snooping bindings table.

802.1x Readiness Check

The 802.1x readiness check monitors 802.1x activity on all the switch ports and displays information about
the devices connected to the ports that support 802.1x. You can use this feature to determine if the devices
connected to the switch ports are 802.1x-capable. You use an alternate authentication such as MAC
authentication bypass or web authentication for the devices that do not support 802.1x functionality.
OL-29048-01
AV Pair Name START
User-Name Always
NAS-IP-Address Always
NAS-Port Always
Framed-IP-Address Never
Class Always
Called-Station-ID Always
Calling-Station-ID Always
Acct-Status-Type Always
Acct-Delay-Time Always
Acct-Input-Octets Never
Acct-Output-Octets Never
Acct-Input-Packets Never
Acct-Output-Packets Never
Acct-Session-ID Always
Acct-Authentic Always
Acct-Session-Time Never
Acct-Terminate-Cause Never
NAS-Port-Type Always
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
802.1x Readiness Check
INTERIM STOP
Always Always
Always Always
Always Always
7
Sometimes Sometimes
Always Always
Always Always
Always Always
Always Always
Always Always
Always Always
Always Always
Always Always
Always Always
Always Always
Always Always
Always Always
Never Always
Always Always
277