Starting Remote UI
To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI.
Check the IP address set to the machine in advance (
your Network Administrator.
Start the Web browser.
Enter "http://(the IP address of the machine)/" in the address field, and press the
If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://
If using a DNS server
You can enter "<host name of the machine>.<domain name>" instead of "IP address of the machine"
If a security alert is displayed
A security alert may be displayed when the Remote UI communication is encrypted (
Encrypted Communications(P. 287) ). When certificate settings or TLS settings have no errors, continue
browsing the Web site.
Log on to the Remote UI.
When the Department ID Management is disabled
Select [Management Mode] or [General User Mode].
You can perform all the Remote UI operations and settings. Enter the System Manager password in
Using Remote UI
Network Status Print(P. 443) ). If you have any questions, ask
Using TLS for