Performing a Quick Start of the Machine
If you specify the quick startup settings, you can reduce the time from when the power switch is pressed until the
screens become operable. The way of turning OFF the power to perform a quick start of the machine is called "quick
Configuring Quick Startup Settings(P. 36)
Turning OFF the Power (Performing a Quick Turn-OFF)(P. 37)
Before Configuring Quick Startup Settings
When you are using a network
If any of the settings below is <On>, the quick start function is disabled.
RARP, BOOTP, IPv6
Configuring IPSec Settings(P. 291)
When you are using the MEAP function
Check whether the currently installed MEAP applications support the quick start function.
Configuring Quick Startup Settings
to select <Control Menu>, and press
Select <Main Pwr Quick Start>, and press
Select <On>, and press
Disables the Quick Start function.
Enables the Quick Start function.
Perform a hard reset.
The settings are enabled after the hard reset is performed.
Performing a Hard Reset(P. 448)