When changing the paper size or type
The factory default settings for paper size and type are <A4> and <Mixed Types>, respectively. If you load a
different size or type of paper into the machine, make sure to change the setting. If you do not change the
paper size or type setting, the machine cannot print properly.
When you want to print a document from an environment not allowing you to make settings for paper size
and paper type, such as from a computer running an operating system or a mobile device that does not
support any printer driver, set <Standard Paper Size> and <Default Paper Type>.
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
multi-purpose tray (
(previously printed side face down).
When you want to print on the back side of the paper that is already printed, set <Manual 2-Sided (MP)> to
<2nd Side> in the setting menu of the operation panel.
Load one sheet of paper each time you print.
You can use only the paper printed with this machine.
You cannot print on the side that has previously been printed on.
Loading a Custom Size Paper
To load custom size paper or other paper whose size is not found in the paper size markings on the paper drawer, use
the following procedure.
Pull out the paper drawer until it stops, and remove it while lifting the front side.
Slide the paper guides apart.
Press the lock release lever to slide the paper guides outward.
Specifying Paper Size and Type in the Paper Drawer(P. 58)
Loading Paper in the Multi-Purpose Tray(P. 46) ), with the side to print face up
Manual 2-Sided (MP)(P. 455)