5
Click the [WINS] tab, select [Enable NetBIOS over TCP/IP], and then click [OK].
6
Click [OK] until all dialog boxes are closed.
●
Restart the computer if you are prompted to do so.
Installing the Printer Driver
For how to install the printer driver, see the manuals for the relevant drivers on the online manual website.
When a port selection screen appears during installation
●
Follow the procedure below.
1
Click [Add Port].
2
Select [Network] and click [OK].
3
From the list, select "Workgroup Name," "Server Name," and "Printer Name" that were
specified in the SMB protocol settings in this order.
Network
Configuring SMB(P. 235)
239