Table of Contents
Advertisement
Optimal Balance
The machine returns from sleep mode rapidly. When the devices directly connected to the machine support
EEE (Energy Efficient Ethernet), power consumption can be reduced to a greater degree. Normally use this
setting.
Exit Speed
The machine returns from sleep mode more rapidly.
Energy Saving
Communication speed during sleep mode is reduced for lowest power consumption.
●
This item is available when <Sleep Mode> is set to <High (Deep Sleep)>.
IEEE802.1X
Enable or disable IEEE 802.1X authentication. Use the Remote UI to specify detailed settings that are applied when
IEEE802.1X authentication is enabled.
Off
On
(
message
Reset(P. 448) )
Address Filter
Enable or disable communication restricted with the IP address and MAC address. Use the Remote UI to specify the
address to restrict.
Basic Printing Operations(P. 73)
Off
On
Setting Menu List
Configuring IEEE 802.1X Authentication(P. 302)
)
<Network>
Check the message
<Off> or <On>
Perform a hard reset (
386
Entering Sleep Mode(P. 63)
<IEEE802.1X>
Check the
Performing a Hard
Advertisement
Table of Contents
