To create comments on the machine as necessary, you can enter up to 192 characters depending on the
[Use LM Announce]
Select the check box to notify the LAN Manager of existence of the machine. If you do not need to notify,
clear the check box, reducing a network load.
[Use SMB Printing]
When using SMB printing with the machine, select the check box.
To specify the name of the machine, you can enter up to 13 characters depending on the character type.
You cannot use spaces.
Perform a hard reset.
Click [Device Control], select [Hard Reset], and then click [Execute].
The settings are enabled after the hard reset is performed.
Using the operation panel
You can also enable or disable the SMB server from the setting menu of the operation panel.
You can also enable or disable SMB print from the setting menu of the operation panel.
Configuring WINS(P. 219)
Configuring Settings on the Computer for Printing(P. 238) .