Select Feeder Menu
The settings are the same as those for <Paper Source> in the
here are also applied to the <Paper Source> settings.
Settings marked with an asterisk (*) are not displayed depending on other settings or whether an optional
paper feeder is installed in the machine.
Paper Source(P. 450)
MP Tray Paper Size(P. 450)
Drawer N Paper Size (N=1, 2, 3, 4)(P. 451)
Standard Paper Size(P. 452)
MP Tray Priority(P. 452)
MP Tray for Mix Ppr.(P. 453)
Auto Select Drawer(P. 453)
Select the paper source from which paper is fed. When you want to automatically change the paper source based on
the paper size and paper type, select <Auto>.
MP Tray Paper Size
Specify the size of the paper that is loaded in the multi-purpose tray.
Purpose Tray(P. 60)
Setting Menu List
The settings about the paper source and the size of paper loaded in the machine
are listed with short descriptions. When you press
the Select Feeder menu is displayed. Default settings are marked with a dagger ( ).
Setup Menu(P. 354) . The settings specified
Default Paper Type(P. 454)
MP Tray Paper Type(P. 454)
Drawer N Paper Type (N=1, 2, 3, 4)(P. 455)
Manual 2-Sided (MP)(P. 455)
2-Sided Printing(P. 456)
Select the paper source
Specifying Paper Size and Type in the Multi-
) on the operation panel,