Lights up when the machine is ready for printing or otherwise blinks.
Lights up when a problem occurs to disable printing.
Lights up if the machine enters sleep mode while being off line.
Lights up when the machine is receiving print data or any print data remains in the memory of the machine.
Blinks when print data is being processed.
Energy Saver key
Press to put the machine into sleep mode. This key lights up in green when the machine is in sleep mode.
Press the key again to exit sleep mode.
Each press of this key cycles through the functions in the order of: Print Screen
USB Direct Print
logging on when department ID management is enabled, the authentication screen is displayed.
Select Feeder key
Press to select the paper source or specify the paper size.
Displays the login screen for using the MEAP function. After you finish using the machine, press this key
again to log off.
Press to delete the entered numbers and text.
Switches between online mode (printing jobs are accepted) and offline mode (no printing job is accepted).
This key lights up green when the machine is online and goes off when the machine is offline. Usually, keep
the machine online, but set it to offline when specifying settings of
If you do not operate the key for 2 minutes when the machine is offline and the
displayed, the machine automatically becomes online. You can select <Auto Reset Time> to change this
time value (
Auto Reset Time(P. 357) ).
Press to enter symbols such as "@" or "/".
Entering Sleep Mode(P. 63)
Print Screen. Select the function you want to use. If you press this key without
Select Feeder Menu(P. 450)
User Maintenance(P. 400) in the
Main Screen(P. 27) is