Setting The System Manager Password - Canon LBP312 SERIES User Manual

Setting the System Manager Password

Changing the settings configured in the machine from the Remote UI requires administrative privileges. Follow the
procedure shown below to change the System Manager password. The System Manager password settings
information is critical to the security of the machine, so make sure that only Administrators know the System Manager
password.
● The factory default setting of the System Manager password is "7654321." Note that it is not preferable to
use this value as it is, from the viewpoint of security. It is recommended that you change the value by using
the following procedure.
1
Start the Remote UI and log on in Management Mode.
2
Click [Settings/Registration].
3
Click [Security]
Security
[Management Settings].
246
Starting Remote UI(P. 326)
167A-041