Table of Contents
Advertisement
(
)
Settings>
Hard Reset(P. 448) )
Discovery Response
Select whether to set the machine to respond to multicast discovery packets on the network. Use the Remote UI
to specify the scope name that is used to include the machine into a specific scope.
Device Management Software(P. 231)
Off
On
(
)
Settings>
Performing a Hard Reset(P. 448) )
IPSec
Select whether to perform encrypted communication by establishing a virtual private network (VPN) via IPSec.
Use the Remote UI to register and specify the security policies.
Off
On
(
)
Settings>
Hard Reset(P. 448) )
Sleep Notif. Set.
Specify settings for SLP communication to notify imageWARE of the power status of the machine. If you set
<Sleep Mode Notif.> to <On>, you can expect the machine to avoid unnecessary communication during sleep
mode and reduce the total power consumption.
Software(P. 231)
Sleep Mode Notif.
Enable or disable SLP communication. If you select <On>, the power status of the machine is notified to
imageWARE.
Off
On
Setting Menu List
<Network>
Check the message
<SNTP>
<Off> or <On>
<Network>
Check the message
<Discovery Response>
<Network>
Check the message
<IPSec>
<Off> or <On>
Configuring Settings for Device Management
379
<TCP/IP
Perform a hard reset (
Configuring Settings for
<TCP/IP
<Off> or <On>
Perform a hard reset (
Configuring IPSec Settings(P. 291)
<TCP/IP
Perform a hard reset (
Performing a
Performing a
Advertisement
Table of Contents
