Table of Contents
Advertisement
3
Specify the IP address, subnet mask, and gateway address (or default gateway).
●
Select the item to set, press
How to enter addresses
●
Use
/
increase/decrease the value.
When you are unsure of the IP address to input
●
The IP address can be determined from the router settings of the network.
Address to Assign to the Machine(P. 186)
5
Perform a hard reset.
➠
The settings are enabled after the hard reset is performed.
Checking whether the settings are correct
●
Make sure that the Remote UI screen can be displayed with your computer.
If you have changed the IP address after installing the printer driver
●
You need to specify the port to use again. For more information, see the description of the procedure for
changing the standard TCP/IP port in the manuals for the relevant drivers on the online manual website.
Determining the IP Address to Assign to the Machine
When you want to use a fixed IP address for the machine, you can determine the IP address as shown below.
◼
To Determine the IP Address
An IP address consists of four numbers delimited by a period (.) (example: 192.168.1.45). Each number must be
in the range from 0 to 255. In general, set the first three numbers to be the same as those for the router
because they are common in the network. Determine the last number (for example, 45 in 192.168.1.45) that is
different from that for other devices.
Network
, enter an address, and press
to move to the target field (a period-delimited input area), and use the numeric keys to
Performing a Hard Reset(P. 448)
.
186
Determining the IP
Starting Remote UI(P. 326)
Advertisement
Table of Contents
