Table of Contents
Advertisement
2
Use
/
to select <Soft Reset>, press and hold
release it.
➠
The message <Execute hard reset?> is displayed.
3
Select <Yes>, and press
➠
When a hard reset is executed, the machine is restarted.
●
When a soft reset or hard reset is performed, secured documents stored in the optional SD card are also
deleted.
Form Feed
If printing is canceled from the computer or the communication is interrupted during data reception, the data may
remain in the memory of the machine, preventing the printing from finishing. The next print data cannot be printed
with the remaining data left as is. In this case, select <Form Feed> to forcibly print the data remaining in memory.
(
●
If the remaining data is not printed, perform a soft reset.
●
If the data still remains in the memory of the machine after a form feed is performed (the [Job] indicator is lit
on the machine), perform a soft reset.
Shut Down
When turning OFF the machine, shut down the machine from the operation panel without using the power switch.
Turning OFF the Power (Performing a Shutdown)(P. 34)
Setting Menu List
.
)
<Form Feed>
for 5 seconds or more, and
<Yes>
449
Advertisement
Table of Contents
