Canon LBP312 SERIES User Manual page 484

Hide thumbs Also See for LBP312 SERIES:
Table of Contents

Advertisement

IE The certificate is incorrect.
An error has occurred as a result of verification of the certificate received from the authentication server
by using the CA certificate during IEEE802.1X authentication.
Check the certificate of the authentication server.
Install the CA certificate in the machine.
Using CA-issued Key Pairs and Digital Certificates(P. 319)
IEEE802.1X error. Set the necessary auth. information.
The information specified for IEEE802.1X authentication is not sufficient.
Check the IEEE802.1X settings, and specify the settings properly.
Configuring IEEE 802.1X Authentication(P. 302)
Image browse data error.
The TIFF data contains data that the machine cannot process while receiving.
Set <TIFF Spooler> to <On>, and print the file again. If the file size exceeds 40 MB, install an SD card.
TIFF Spooler(P. 424)
Installing an SD Card(P. 569)
Because the data cannot be printed, press
Image data error.
The TIFF or JPEG data contains data that is not available for the machine.
Because the data cannot be printed, press
Insert toner cartridge.
The toner cartridge is not set or properly set.
Properly set the toner cartridge.
How to Replace Toner Cartridges(P. 513)
Key management file is corrupt or deleted.
Files related to key management are damaged.
Restart the machine, regenerate or reinstall the key and certificate, and then specify the TLS settings.
Turning ON/OFF the Power(P. 34)
Specifying the TLS Encrypted Communication (P. 244)
Configuring Settings for Key Pairs and Digital Certificates(P. 308)
While this error message is displayed, the machine cannot be connected from the Remote UI until it is
restarted.
Troubleshooting
(
) to cancel the print job.
(
) to cancel the print job.
478

Advertisement

Table of Contents
loading

Table of Contents