Adjusting Print Density
If the resulting print is darker or lighter than expected, you can adjust the toner density. You can make fine adjustment
of the toner density by dividing the whole density range into three areas.
If <Toner Save> is set to <On>, you cannot use this adjustment function.
to select <Print Quality>, and press
Adjust the density.
Select <Density>, and press
Set a "+" value to increase the density. Set a "-" value to decrease the density.
Making fine adjustment of toner density by density level
You can make fine adjustment of toner density on three density levels - high, medium, and low.
Select <Density (Fine Adj)>, and press
Select the desired density level, and press
to adjust the density.
Toner Save(P. 394)