Table of Contents
Advertisement
Starting Remote UI
To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI.
Check the IP address set to the machine in advance (
ask your Network Administrator.
●
To log on to the Remote UI, you must set a Remote UI Access PIN on the machine beforehand.
Remote UI PIN(P. 147)
1
Start the Web browser.
2
Enter "http://<the IP address of the machine>/" in the address field, and press the
[ENTER] key.
●
If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://
[fe80::2e9e:fcff:fe4e:dbce]/).
If a security alert is displayed
●
A security alert may be displayed when the Remote UI communication is encrypted (
Key and Certificate for TLS(P. 159) ). When certificate settings or TLS settings have no errors, continue
browsing the Web site.
3
Log in to the Remote UI.
Select [System Manager Mode] or [General User Mode], and then enter the appropriate PIN in [Remote UI
Access PIN] as necessary.
[System Manager Mode]
You can perform all the Remote UI operations and settings.
[General User Mode]
You can check the status of documents or the machine, and you can also change some of the settings. When
you want to check if a specific document of yours is in the print queue or cancel the printing of a document
of yours in the print queue, enter the user name of the document in [User Name]. The user name is
Managing the Machine
Viewing Network Settings(P. 45) ). If you have any questions,
178
23FJ-03L
Setting a
Configuring the
Advertisement
Table of Contents
